C Series Lead Assemblies and Receptacles In 1997, Reynolds Industries, Inc. acquired the RLA series and other connector product lines from Rowe Industries, Inc. The RLA series has been renamed C series C series high voltage lead assemblies and receptacles are widely used in CRT displays, ECM equipment, power supplies, Radar and almost any application where high voltage components need to be interconnected. The plug end is molded onto a desired length of silicone cable and can be ordered Single-Ended, Double-Ended or with shielding. C series assemblies operate at voltages ranging from 10 KVDC to 50 KVDC and are interchangeable with Reynolds series 700 connectors and the LGH series. C series lead assemblies will operate up to 70,000 ft. and over a temperature range of -55°C to +95°C. Interface cleaning High voltage connectors must always be cleaned prior to mating. The proper cleaning method is to wipe or spray the interface area with isopropyl alcohol and immediately blow an inert gas such as dry nitrogen over the interface area until dry. No other cleaning method should be attempted. WARNING: These connectors should NEVER be handled, mated or unmated when voltage is applied.