| Items |
 /Asset/178-8566-178-8559.jpg 178-8566 2 Pin Straight Single-Ended Plug Cable Assembly |
/Asset/178-8566-178-8559.jpg 178-8557 2 Pin Straight Single-Ended Plug Cable Assembly |
/Asset/178-8566-178-8559.jpg 178-8558 2 Pin Straight Single-Ended Plug Cable Assembly |
/Asset/178-8566-178-8559.jpg 178-8559 2 Pin Straight Single-Ended Plug Cable Assembly |
 /Asset/178-8477-178-8555.jpg 178-8477 2 Pin Right Angle Single-Ended Plug Cable Assembly |
|||||
| Series | PeeWee | |||||||||
| Voltage Rating | 12 kVDC | |||||||||
| Altitude Rating | 70,000 ft | |||||||||
| Operating Temperature | -55 to 125 ºC | |||||||||
| Current Rating | 5 A | |||||||||
| Insulator Material | Plastic | |||||||||
| Coupling Style | Threaded or Jack Screw | |||||||||
| Coupling Nut Material | Aluminum | |||||||||
| Coupling Nut Finish | Nickel Plated | |||||||||
| Contact Material | BeCu | |||||||||
| Contact Finish | Gold with CRES Hood | |||||||||
| Mating Compatibility | Mates with Pee-Wee series two pin receptacle cable assemblies. | |||||||||
| Wire Insulation | Etched FEP | Silicone Coated FEP | Etched FEP with NOMEX® Jacket | Silicone Coated FEP with NOMEX® Jacket | Etched FEP | |||||
| Braid Termination | Band | |||||||||
| Test Voltage at 70,000 ft | 18 kVDC | |||||||||
| Wire Diameter | 0.050 in | 0.060 in | 0.050 in | 0.060 in | 0.050 in | |||||
| Sea Level Voltage Rating (Mated) | ||||||||||
| Contact Type | Female | |||||||||
| Interface Seal | Silicone Rubber | |||||||||
| Contact Design | Split Finger, Closed Entry, Molded in Place | |||||||||
| Contact Size | 22 AWG | |||||||||
| Contact Diameter | 0.030 | |||||||||
| Soldering Bucket | Accommodates 22 AWG max. | |||||||||
| Encapsulation | Back end of connector is encapsulated with silicone rubber | |||||||||
| Assembly Type | Single-Ended Plug Cable Assembly | |||||||||
| Number of Contacts | 2 | |||||||||
| Standard/Non-Standard1 | Nonstandard Part | |||||||||
| Sealed Receptacle | No | |||||||||
| Cable Assembly Length2 | All cable assembly cable lengths are to be specified in inches only. For example, to order part number 178-6027 with a cable length of 10 feet 8 inches the cable assembly part number would be specified as 178-6027-128N. | |||||||||
| Manufacturing Notes | Contact Teledyne Reynold's Engineering to discuss custom designs. Product numbers and specs subject to change without notice. Products listed represent only a small selection of Teledyne Reynold's products please visit www.teledynereynolds.com for the most up to date product information. | |||||||||
| Part # | 178-8111 | |||||||||
| Operating Voltage | 18 kVDC | |||||||||
| Conductor AWG | 24 | |||||||||
| Conductor Strands | 19/36 | |||||||||
| Conductor Plating | SPC | |||||||||
| Insulation Material | Etched FEP | Silicone Coated FEP | Etched FEP | Silicone Coated FEP | Etched FEP | |||||
| Insulator Diameter | 0.050 in1.27 mm | 0.060 in1.52 mm | 0.050 in1.27 mm | 0.060 in1.52 mm | 0.050 in1.27 mm | |||||
| Jacket Material | Nomex® | |||||||||
| Assembly Type | ||||||||||
|
||||||||||
