Contact us at: (310) 823-5491
Extruded FEP insulated high voltage wire and cable offers exceptional dielectric strength without the disadvantages common to equally rated silicone rubber insulated cables. As a result, cable assemblies or cable bundlea are of smaller diameter and therefore take up substantially less volume and have a smaller bend radius which allows the designer to better utilize the space within the system. It has good corona inceptim qualities and its constructim gives it excellent durability and resistance to dielectric/cwling fluid degradation.

While difficult to bond to, with the use of Reynolds proper abrading and coating preparations an excellent silastic bond is possible. Additionally, FEP insulation, being a harder material than silicone rubber, is not prone to pin-holing and high voltage punch-thru when the cable surface is abraded or when strands break during in-field service. FEP is also more resistant to damage when making contact with sharp edges.

FEP cable should not only be considered for use in cable assemblies, but as high voltage hookup wire within encapsulated high voltage power supplies, TWTs and transformers.

Low DC corona inception, particularly after numerous temperature cycles, is another advantage of FEP over silicone cables. Teflon tape wrapped cable, which is similar to FEP in dielectric strength and corona inception, is difficult to bond to because of its multiple spiral cross section, irregular surface and variations in diameter

Temperature Range
-55 to +125°C

Unit of Measure

Specifications

Conductor Gauge

N/A 22 AWG

Conductor Strands

N/A 19/34

Conductor Plating

N/A Silver Plated

Conductor Material

N/A Copper

Insulator Material

N/A FEP

Conductor Diameter

N/A 0.060 in
Default Color1 N/A Natural

Overall Diameter

N/A 0.060 in

Operating Temperature

N/A -55 to 125 ºC
Standard/Non-Standard2 N/A Standard Part

Voltage Rating

N/A 20 kVDC

Cable / Wire Properties

Silicone Coated

N/A No

Jacketed

N/A No

Etched

N/A Yes

Twisted Pair

N/A No

Twisted Shielded Pair

N/A No

Alternate Cable Part Number Equivalents

Silicone Coated Part Number

N/A 178-9277

Nomex ® Jacketed Silicone Coated Part Number

N/A 178-5614
  • 1 Other colors available upon request.
  • 2 Non-standard parts will have longer lead times and potentially higher pricing. Please contact Teledyne Reynolds Engineering department to determine feasibility for use in your application.