Contact us at: (310) 823-5491
"Quiet Line" Distributed Loss R.F. Attenuation Cable
Quiet Line is a continuously extruded, distributed loss, low pass filter line for high voltage applications. Quiet line is a flexible element offering R.F. power attenuation and can be spliced onto an existing high voltage lead assembly or supplied as an entire high voltage lead assembly.

Quiet Line is available with or without a silicone rubber coating. This continuous thin wall coating is applied over the FEP or PFA jacket and allows the user to achieve a superior dielectric bond when potting or encapsulating with a compatible silicone material.

Quiet Line is available either shielded or non-shielded with or without the silicone rubber coating. Six loss core diameters are offered providing a range of rated voltages and R.F. insertion loss characteristics. The configurations are shown with the attributes of each configuration.

Special configurations are available pending a review of your requirements by Reynolds engineering department personnel.

Operating Temperature
-55 to +125 ºC

Unit of Measure

Specifications

Attenuation (480 MHZ)

N/A 21 dB/ft

Attenuation (2.4 GHZ)

N/A 130 dB/ft

Conductor Gauge

N/A 20 AWG

Conductor Strands

N/A 19/32

Diameter

N/A 0.160 in4.0 mm

Overall Diameter

N/A 0.160 in

Insulator Material

N/A FEP

Braid Material

N/A Silver Plated Copper

Jacket Material

N/A FEP PFA

Voltage Stress Testing

N/A 100% test at 140% of rated voltage (room ambient)

Insertion Loss Testing

N/A 100% insertion loss verification performed on each extrusion lot. The swept frequency insertion loss technique is used within the specified frequency range per MIL-C-17F. Test specimens are shielded with a BNC termination.

Operating Temperature

N/A -55 to 125 ºC
Default Color1 N/A Natural

Conductor Plating

N/A Tin Plated

Conductor Material

N/A Copper

Construction Style

N/A 2
Standard/Non-Standard2 N/A Standard Part

Voltage Rating

N/A 20 kVDC

Cable / Wire Properties

Jacketed

N/A No

Silicone Coated

N/A Yes

Etched

N/A No

Twisted Pair

N/A No

Twisted Shielded Pair

N/A No
  • 1 Additional colors available upon request
  • 2 Non-standard parts will have longer lead times and potentially higher pricing. Please contact Teledyne Reynolds Engineering department to determine feasibility for use in your application.