Ceramic Panel Mount Receptacle
Maxxum series connectors are robust in their construction, using stainless steel for the threaded coupling nut and body. This series is ideally suited for use as a high power, TWT collector interconnect or in E-beam inspection equipment where a low partial discharge design and hermetic feedthrough are required.
The cable assemblies use FEP cable with a double braid crimped directly to the stainless steel body of the connector
Series |
N/A Maxxum |
Mating Compatibility |
N/A Mates all Maxxum series plug cable assemblies. |
Voltage Rating |
N/A 25 kVDC |
Test Voltage |
N/A 130% of rated voltage at 70,000 ft. simulated altitude |
Altitude/Reduced Pressure Rating |
N/A 70,000 ft. |
Current Rating (RMS) |
N/A 5 A |
Assembly Type |
N/A Receptacle Bag Assembly |
Number of Contacts |
N/A 1 |
Insulator Material |
N/A Ceramic |
Operating Temperature |
N/A -55 to 125 ºC |
Maximum Leak Rate (Helium) |
N/A 1x10-8 cc/sec |
Panel Mounting Style |
N/A Solder Flange |
Interface Seal |
N/A Silicone Rubber |
Coupling Style |
N/A Threaded |
| Standard/Non-Standard1 | N/A Standard Part |
Sealed Receptacle |
N/A Yes |
