Contact us at: (310) 823-5491
Request Information
  1. Capacitance Tolerance: ±10%
  2. Dissipation Factor: .005 Max. at 25°C, 1 kHZ
  3. Insulation Resistance:
      4000 MΩ*µF at25°C, need not exceed 100GΩ
      25 MΩ*µF at 125°C, need not exceed 1GΩ
  4. Dielectric withstanding voltage:
      5.0 kV rated
      7.5 kV burn-in for 2 hours at 100°C
      10.0 kV proof for 5 seconds
  5. Mylar wrapped, epoxy endcapped
  6. Black dot indicates outer foil
  7. Wire leads are AWG 18 solder coated copper
  8. Safety: Capacitors are shipped with leads shorted

We also manufacture military quality standard and custom designed Spark Gaps and Voltage Multipliers. If you have a corona test requirement but lack the necessary test equipment, we offer AC and DC corona testing services including a test report. Call for information concerning these services.

Unit of Measure

Specifications

Capacitance

 N/A 5 nF

Capacitance Tolerance

 N/A ±10%

Length

 N/A 1.44 in36.6 mm

Width

 N/A 0.82 in20.8 mm

Thickness

 N/A 0.17 in4.3 mm

Dissipation Factor

 N/A 0.005 Max. at 25°C, 1 kHZ

Dielectric Withstanding Voltage

 N/A 10.0 kV proof for 5 seconds 5 kV rated 7.5 kV burn-in for 2 hours at 100°C
Standard/Non-Standard1 N/A Standard Part

Voltage Rating

 N/A 5 kVDC

Cable Preparation

Insulation Resistance

 N/A 25 MΩ*µF at125°C, need not exceed 1GΩ 4000 MΩ*µF at25°C, need not exceed 100GΩ
  • 1 Non-standard parts will have longer lead times and potentially higher pricing. Please contact Teledyne Reynolds Engineering department to determine feasibility for use in your application.
Home | Terms and Conditions | Careers | Search | Contact Us

1001 Knox Street, Torrance, California, 90502
Copyright © 2020 Teledyne Technologies Incorporated. All rights reserved.