Contact us at: (310) 823-5491
The Hi/MateD™ Series of high voltage insertable/removable contact assemblies are rated at 13.5 kVDC and can be fitted into a Subminiature-D (Sub-D) 8 gauge insert cavity. The assemblies are ideal for airborne applications up to 70,000 feet altitude over a temperature range of -55 °C to 125 °C. Hi/MateDis fully compatible with signal lines, co-axial, fiber optic and power contacts in the same Sub-D connector. These contact assemblies are independent high voltage connectors, and do not rely upon the dielectric properties of the Sub-D insert.

Complete cable assemblies with Hi/MateD™ high voltage contact assemblies installed into Positronic CBD Series Subminiature-D connectors, are available from Teledyne Reynolds as fully tested units.
Unit of Measure



N/A Hi/MateD

Number of Contacts

N/A Various Pins

Voltage Rating

N/A 13.5 kVDC

Altitude Rating

N/A 70,000 ft

Operating Temperature

N/A -55 to 125 ºC

Current Rating

N/A 4 A

Insulator Material

N/A Plastic

Coupling Style

N/A D-Sub

Coupling Nut Material

N/A D-Sub

Contact Material

N/A Brass

Contact Finish

N/A Gold

Wire Type

N/A Non-Shielded

Wire Insulation


Test Voltage at 70,000 ft

N/A 18 kVDC
Cable Assembly Length1 N/A All cable assembly cable lengths are to be specified in inches only. For example, to order part number 178-6027 with a cable length of 10 feet 8 inches the cable assembly part number would be specified as 178-6027-128N.

Manufacturing Notes

N/A Contact Teledyne Reynold's Engineering to discuss custom designs. Product numbers and specs subject to change without notice. Products listed represent only a small selection of Teledyne Reynold's products please visit for the most up to date product information.
  • 1 (Mentioned in the image by **)