Teledyne Reynolds, Incorporated
Teledyne Reynolds, Incorporated
1001 Knox Street.
Torrance, California
90502
TEL: (310) 823-5491 • FAX #1: (310) 822-8046
FAX #2: (310) 822-6815 • tri_techsupport@teledyne.com
Print Back
  1. Capacitance Tolerance:- ± 10%
  2. Dissipation Factor:- 0.005 Max. at 25°C, 1 kHZ
  3. Insulation Resistance:-
      4000 MΩ*µF at25°C, need not exceed 100GΩ
      25 MΩ*µF at125°C, need not exceed 1GΩ
  4. Dielectric withstanding voltage:-
      2.5 kV rated
      3.75 kV burn-in for 2 hours at 100°C
      5.0 kV proof for 5 seconds
  5. Mylar wrapped, epoxy end capped
  6. Black dot indicates outer foil
  7. Wire leads are AWG 18 solder coated copper
  8. Safety:- Capacitors are shipped with leads shorted

We also manufacture military quality standard and custom designed Spark Gaps and Voltage Multipliers. If you have a corona test requirement but lack the necessary test equipment, we offer AC and DC corona testing services including a test report. Call for information concerning these services.

PI-Page-no-1
SI-Page-no-1
Unit of Measure
Items PI-Page-no-1
M103A252A000
Standard Micapacitors 2.5 kVDC Rated 		PI-Page-no-1
M253A252A000
Standard Micapacitors 2.5 kVDC Rated 		PI-Page-no-1
M503A252A000
Standard Micapacitors 2.5 kVDC Rated 		PI-Page-no-1
M104A252A000
Standard Micapacitors 2.5 kVDC Rated 		PI-Page-no-1
M254A252A000
Standard Micapacitors 2.5 kVDC Rated
Capacitance N/A 10 nF N/A 25 nF N/A 50 nF N/A 100 nF N/A 250 nF
Capacitance Tolerance N/A ±10%
Length N/A 1.31 in33.3 mm N/A 1.56 in39.6 mm N/A 1.94 in49.3 mm N/A 2.19 in55.6 mm N/A 2.81 in71.4 mm
Width N/A 0.73 in18.5 mm N/A 0.83 in21.1 mm N/A 1.15 in29.2 mm N/A 1.36 in34.5 mm N/A 1.79 in45.5 mm
Thickness N/A 0.13 in3.3 mm N/A 0.18 in4.6 mm N/A 0.18 in4.7 mm N/A 0.24 in6.1 mm N/A 0.30 in7.6 mm
Dissipation Factor N/A 0.005 Max. at 25°C, 1 kHZ
Insulation Resistance N/A 25 MΩ*µF at125°C, need not exceed 1GΩ 4000 MΩ*µF at25°C, need not exceed 100GΩ
Dielectric Withstanding Voltage N/A 2.5 kV rated 3.75 kV burn-in for 2 hours at 100°C 5.0 kV proof for 5 seconds
Standard/Non-Standard1 N/A Standard Part
Voltage Rating N/A 2.5 kVDC
  • 1 Non-standard parts will have longer lead times and potentially higher pricing. Please contact Teledyne Reynolds Engineering department to determine feasibility for use in your application.