Teledyne Reynolds - Standard Micapacitors 30 kVDC Rated

Capacitance Tolerance:- ± 10%
Dissipation Factor:- 0 .005 Max. at 25°C, 1 kHZ
Insulation Resistance:-
4000 MΩ*µF at25°C, need not exceed 100GΩ
25 MΩ*µF at125°C, need not exceed 1GΩ
Dielectric withstanding voltage:-
   30 kV rated
   34.5 kV burn-in for 2 hours @ 100°C
   39 kV proof for 5 seconds
Mylar wrapped, epoxy endcapped
Black dot indicates outer foil
Wire leads are AWG 18 solder coated copper
Safety:- Capacitors are shipped with leads shorted

We also manufacture military quality standard and custom designed Spark Gaps and Voltage Multipliers. If you have a corona test requirement but lack the necessary test equipment, we offer AC and DC corona testing services including a test report. Call for information concerning these services.

Unit of Measure

Items	M501A303A000 Standard Micapacitors 30 kVDC Rated Request Quote	M102A303A001 Standard Micapacitors 30 kVDC Rated Request Quote	M252A303A000 Standard Micapacitors 30 kVDC Rated Request Quote	M502A303A000 Standard Micapacitors 30 kVDC Rated Request Quote
Capacitance	N/A 0.5 nF	N/A 1 nF	N/A 2.5 nF	N/A 5 nF
Capacitance Tolerance	N/A ±10%
Length	N/A 3.19 in81.0 mm	N/A 3.57 in90.7 mm	N/A 4.32 in110 mm	N/A 4.69 in119 mm
Width	N/A 2.09 in53.1 mm	N/A 2.46 in62.5 mm	N/A 3.06 in77.7 mm	N/A 3.42 in86.9 mm
Thickness	N/A 0.33 in8.4 mm	N/A 0.35 in8.9 mm	N/A 0.39 in9.9 mm	N/A 0.68 in17.3 mm
Dissipation Factor	N/A 0.005 Max. at 25°C, 1 kHZ
Insulation Resistance	N/A 25 MΩµF at125°C, need not exceed 1GΩ 4000 MΩµF at25°C, need not exceed 100GΩ
Dielectric Withstanding Voltage	N/A 30 kV rated 34.5 kV burn-in for 2 hours at 100°C 39 kV proof for 5 seconds
Standard/Non-Standard¹	N/A Standard Part
Voltage Rating	N/A 30 kVDC
¹ Non-standard parts will have longer lead times and potentially higher pricing. Please contact Teledyne Reynolds Engineering department to determine feasibility for use in your application.