Teledyne Reynolds, Incorporated
Teledyne Reynolds, Incorporated
1001 Knox Street.
Torrance, California
90502
TEL: (310) 823-5491 • FAX #1: (310) 822-8046
FAX #2: (310) 822-6815 • tri_techsupport@teledyne.com
Print Back
PeeWee is one of a family of subminiature, high-voltage connectors for use in high voltage applications where dense electronic packaging is required. The PeeWee connector uses Teledyne Reynold's patented Advanced Interface™ method of sealing high voltage at reduced atmospheric pressure, which allows the connector to be rated at 12 kVDC at 70,000 feet with a temperature range of -55 °C to 125 °C.
Unit of Measure

Specifications

Series

 N/A PeeWee

Voltage Rating

 N/A 12 kVDC

Altitude Rating

 N/A 70,000 ft

Operating Temperature

 N/A -55 to 125 ºC

Current Rating

 N/A 5 A

Insulator Material

 N/A Plastic

Coupling Style

 N/A Threaded or Jack Screw

Mating Compatibility

 N/A Mates with Pee-Wee series two pin receptacle cable assemblies.

Wire Insulation

 N/A Silicone Coated FEP

Braid Termination

 N/A Band

Test Voltage at 70,000 ft

 N/A 18 kVDC

Wire Diameter

 N/A 0.060 in

Interface Seal

 N/A Silicone Rubber

Soldering Bucket

 N/A Accommodates 22 AWG max.

Encapsulation

 N/A Back end of connector is encapsulated with silicone rubber

Assembly Type

 N/A Single-Ended Plug Cable Assembly

Number of Contacts

 N/A 2
Standard/Non-Standard1 N/A Nonstandard Part

Sealed Receptacle

 N/A No
Cable Assembly Length2 N/A All cable assembly cable lengths are to be specified in inches only. For example, to order part number 178-6027 with a cable length of 10 feet 8 inches the cable assembly part number would be specified as 178-6027-128N.

Manufacturing Notes

 N/A Contact Teledyne Reynold's Engineering to discuss custom designs. Product numbers and specs subject to change without notice. Products listed represent only a small selection of Teledyne Reynold's products please visit www.teledynereynolds.com for the most up to date product information.

Coupling Nut Properties

Coupling Nut Material

 N/A Aluminum

Coupling Nut Finish

 N/A Nickel Plated

Contact Properties

Contact Material

 N/A BeCu

Contact Finish

 N/A Gold with CRES Hood

Contact Type

 N/A Female

Contact Design

 N/A Split Finger, Closed Entry, Molded in Place

Contact Size

 N/A 22 AWG

Contact Diameter

 N/A 0.030

Application

N/A

  • Lasers
  • Photomultipliers
  • TWT
  • Power Supplies

Wire Specifications

Operating Voltage

 N/A 18 kVDC

Conductor AWG

 N/A 24

Conductor Strands

 N/A 19/36

Conductor Plating

 N/A SPC

Insulation Material

 N/A Silicone Coated FEP

Insulator Diameter

 N/A 0.060 in1.52 mm
  • 1 Non-standard parts will have longer lead times and potentially higher pricing. Please contact Teledyne Reynolds Engineering department to determine feasibility for use in your application.
  • 2 (Mentioned in the image by **)