Contact us at: (310) 823-5491
Flange Mounted Plastic Receptacle
Maxxum series connectors are robust in their construction, using stainless steel for the threaded coupling nut and body. This series is ideally suited for use as a high power, TWT collector interconnect or in E-beam inspection equipment where a low partial discharge design and hermetic feedthrough are required.
The cable assemblies use FEP cable with a double braid crimped directly to the stainless steel body of the connector
Unit of Measure
Specifications
Series |
N/A Maxxum |
Assembly Type |
N/A Receptacle Bag Assembly |
Altitude/Reduced Pressure Rating |
N/A 70,000 ft. |
Current Rating (RMS) |
N/A 5 A |
Operating Temperature |
N/A -55 to 125 ºC |
Test Voltage |
N/A 130% of rated voltage at 70,000 ft. simulated altitude |
Mating Compatibility |
N/A Mates all Maxxum series plug cable assemblies. |
Interface Seal |
N/A Silicone Rubber |
Insulator Material |
N/A Plastic or Ceramic |
| Standard/Non-Standard1 | N/A Standard Part |
Coupling Style |
N/A Threaded |
Sealed Receptacle |
N/A Yes |
Wire Insulation |
N/A FEP |
Braid Termination |
N/A Solder |
Mounting Notes |
N/A Requires clearance for .500”-20 UNF thread |
Export Classification |
N/A TBD |
RoHS Compliant |
N/A TBD |
Voltage Rating |
N/A 25 kVDC |
Wire Type |
N/A Shielded |
- 1 Non-standard parts will have longer lead times and potentially higher pricing. Please contact Teledyne Reynolds Engineering department to determine feasibility for use in your application.
Home | Terms and Conditions | Careers | Search | Contact Us
1001 Knox Street, Torrance, California, 90502
Copyright © 2020 Teledyne Technologies Incorporated. All rights reserved.
