Teledyne Reynolds Inc. - Standard Micapacitors 12.5 kVDC Rated

Contact us at: (310) 823-5491

Capacitance Tolerance:- ± 10%
Dissipation Factor:- 0 .005 Max. at 25°C, 1 kHZ
Insulation Resistance:-
4000 MΩ*µF at25°C, need not exceed 100GΩ
25 MΩ*µF at125°C, need not exceed 1GΩ
Dielectric withstanding voltage:-
   12.5 kV rated
   15 kV burn-in for 2 hours @ 100°C
   17.5 kV proof for 5 seconds
Mylar wrapped, epoxy endcapped
Black dot indicates outer foil
Wire leads are AWG 18 solder coated copper
Safety:- Capacitors are shipped with leads shorted

We also manufacture military quality standard and custom designed Spark Gaps and Voltage Multipliers. If you have a corona test requirement but lack the necessary test equipment, we offer AC and DC corona testing services including a test report. Call for information concerning these services.

Request Information

Unit of Measure

Items	M102A133A000 Standard Micapacitors 12.5 kVDC Rated Request Quote	M252A133A000 Standard Micapacitors 12.5 kVDC Rated Request Quote	M502A133A000 Standard Micapacitors 12.5 kVDC Rated Request Quote	M103A133A001 Standard Micapacitors 12.5 kVDC Rated Request Quote	M253A133A001 Standard Micapacitors 12.5 kVDC Rated Request Quote
Capacitance	N/A 1 nF	N/A 2.5 nF	N/A 5 nF	N/A 10 nF	N/A 25 nF
Capacitance Tolerance	N/A ±10%
Length	N/A 1.94 in49.3 mm	N/A 2.19 in55.6 mm	N/A 2.56 in65.0 mm	N/A 3.12 in79.2 mm	N/A 3.94 in100 mm
Width	N/A 1.08 in27.4 mm	N/A 1.36 in34.5 mm	N/A 1.62 in41.1 mm	N/A 2.06 in52.3 mm	N/A 2.72 in69.1 mm
Thickness	N/A 0.20 in5.1 mm	N/A 0.24 in6.1 mm	N/A 0.26 in6.6 mm	N/A 0.27 in6.9 mm	N/A 0.35 in8.9 mm
Dissipation Factor	N/A 0.005 Max. at 25°C, 1 kHZ
Insulation Resistance	N/A 25 MΩµF at125°C, need not exceed 1GΩ 4000 MΩµF at25°C, need not exceed 100GΩ
Dielectric Withstanding Voltage	N/A 12.5 kV rated 15 kV burn-in for 2 hours at 100°C 17.5 kV proof for 5 seconds
Standard/Non-Standard¹	N/A Standard Part
Voltage Rating	N/A 12.5 kVDC
¹ Non-standard parts will have longer lead times and potentially higher pricing. Please contact Teledyne Reynolds Engineering department to determine feasibility for use in your application.