Contact us at: (310) 823-5491

The Hi/MateD™ Series of high voltage insertable/removable contact assemblies are rated at 13.5 kVDC and can be fitted into a Subminiature-D (Sub-D) 8 gauge insert cavity. The assemblies are ideal for airborne applications up to 70,000 feet altitude over a temperature range of -55 °C to 125 °C. Hi/MateDis fully compatible with signal lines, co-axial, fiber optic and power contacts in the same Sub-D connector. These contact assemblies are independent high voltage connectors, and do not rely upon the dielectric properties of the Sub-D insert.

Complete cable assemblies with Hi/MateD™ high voltage contact assemblies installed into Positronic CBD Series Subminiature-D connectors, are available from Teledyne Reynolds as fully tested units.

Unit of Measure
Items
Hi/Mate<sub>D</sub>™ Series High Voltage Multi-Pin Connectors

Single-Ended Plug Contact Assembly

Double-Ended Plug Cable Assembly

Double-Ended Plug Contact Assembly

Single-Ended Receptacle Assembly

Single-Ended Receptacle Contact Assembly

Double-Ended Receptacle Assembly

Double-Ended Receptacle Contact Assembly

Double-Ended Plug-Receptacle Cable Assembly

Double-Ended Plug-Receptacle Contact Assembly
Description N/A The Hi/MateD™ Series of high voltage insertable/removable contact assemblies are rated at 13.5 kVDC and can be fitted into a Subminiature-D (Sub-D) 8 gauge insert cavity. The assemblies are ideal for airborne applications up to 70,000 feet altitude over a temperature range of -55 °C to 125 °C. Hi/MateDis fully compatible with signal lines, co-axial, fiber optic and power contacts in the same Sub-D connector. These contact assemblies are independent high voltage connectors, and do not rely upon the dielectric properties of the Sub-D insert.

Complete cable assemblies with Hi/MateD™ high voltage contact assemblies installed into Positronic CBD Series Subminiature-D connectors, are available from Teledyne Reynolds as fully tested units.
Series N/A Hi/MateD
Number of Contacts N/A Various Pins
Voltage Rating N/A 13.5 kVDC
Altitude Rating N/A 70,000 ft
Operating Temperature N/A -55 to 125 ºC
Current Rating N/A 4 A
Insulator Material N/A Plastic
Coupling Style N/A D-Sub
Coupling Nut Material N/A D-Sub
Contact Material N/A BeCu N/A BeCu N/A Brass N/A Brass N/A Brass/BeCu
Contact Finish N/A Gold
Wire Type N/A Non-Shielded
Wire Insulation N/A FEP
Test Voltage at 70,000 ft N/A 18 kVDC
Cable Assembly Length1 N/A All cable assembly cable lengths are to be specified in inches only. For example, to order part number 178-6027 with a cable length of 10 feet 8 inches the cable assembly part number would be specified as 178-6027-128N.
Manufacturing Notes N/A Contact Teledyne Reynold's Engineering to discuss custom designs. Product numbers and specs subject to change without notice. Products listed represent only a small selection of Teledyne Reynold's products please visit www.teledynereynolds.com for the most up to date product information.
Assembly Type N/A
Assembly Type N/A
  • 1 (Mentioned in the image by **)