Contact us at: (310) 823-5491
Note : Pre-conditioning of FEP wire or cable is recommended because FEP insulation will shrink when exposed to temperature cycling. Re-conditioning should be conducted in an air circulating oven at 204°C (400°F) for one hour. Re-conditioning should only be performed on cut lengths prior to stripping and any termination procedure. No attempt should be made to condition wire or cable in bulk form or while spooled.

Operating Temperature
-55 to +125 ºC
Unit of Measure

Specifications

Insulator Material

N/A FEP
Default Color1 N/A Natural

Operating Temperature

N/A -55 to 125 ºC

Conductor Gauge

N/A 22 AWG

Conductor Strands

N/A 19/34

Conductor Diameter

N/A 0.060 in1.524 mm

Conductor Plating

N/A Silver Plated

Overall Diameter

N/A 0.060 in
Standard/Non-Standard2 N/A Standard Part

Conductor Material

N/A Copper

Voltage Rating

N/A 20 kVDC

Cable / Wire Properties

Jacketed

N/A Yes

Silicone Coated

N/A No

Etched

N/A Yes

Twisted Pair

N/A No

Twisted Shielded Pair

N/A No

Alternate Cable Part Number Equivalents

Etched Part Number

N/A 178-9122

Silicone Coated Part Number

N/A 178-9277

Nomex ® Jacketed Silicone Coated Part Number

N/A 178-5724
  • 1 Other colors available upon request.
  • 2 Non-standard parts will have longer lead times and potentially higher pricing. Please contact Teledyne Reynolds Engineering department to determine feasibility for use in your application.