Teledyne Reynolds, Incorporated
Teledyne Reynolds, Incorporated
1001 Knox Street.
Torrance, California
90502
TEL: (310) 823-5491 • FAX #1: (310) 822-8046
FAX #2: (310) 822-6815 • tri_techsupport@teledyne.com
Print Back
  1. Capacitance Tolerance:-  ± 10%
  2. Dissipation Factor:- 0 .005 Max. at 25°C, 1 kHZ
  3. Insulation Resistance:-
       4000 MΩ*µF at25°C, need not exceed 100GΩ
       25 MΩ*µF at125°C, need not exceed 1GΩ
  4. Dielectric withstanding voltage:-
       12.5 kV rated
       15 kV burn-in for 2 hours @ 100°C
       17.5 kV proof for 5 seconds
  5. Mylar wrapped, epoxy endcapped
  6. Black dot indicates outer foil
  7. Wire leads are AWG 18 solder coated copper
  8. Safety:- Capacitors are shipped with leads shorted
We also manufacture military quality standard and custom designed Spark Gaps and Voltage Multipliers. If you have a corona test requirement but lack the necessary test equipment, we offer AC and DC corona testing services including a test report. Call for information concerning these services.
PI-Page-no-5
SI-Page-no-5
Unit of Measure
Items PI-Page-no-5
M102A133A000
Standard Micapacitors 12.5 kVDC Rated 		PI-Page-no-5
M252A133A000
Standard Micapacitors 12.5 kVDC Rated 		PI-Page-no-5
M502A133A000
Standard Micapacitors 12.5 kVDC Rated 		PI-Page-no-5
M103A133A001
Standard Micapacitors 12.5 kVDC Rated 		PI-Page-no-5
M253A133A001
Standard Micapacitors 12.5 kVDC Rated
Capacitance N/A 1 nF N/A 2.5 nF N/A 5 nF N/A 10 nF N/A 25 nF
Capacitance Tolerance N/A ±10%
Length N/A 1.94 in49.3 mm N/A 2.19 in55.6 mm N/A 2.56 in65.0 mm N/A 3.12 in79.2 mm N/A 3.94 in100 mm
Width N/A 1.08 in27.4 mm N/A 1.36 in34.5 mm N/A 1.62 in41.1 mm N/A 2.06 in52.3 mm N/A 2.72 in69.1 mm
Thickness N/A 0.20 in5.1 mm N/A 0.24 in6.1 mm N/A 0.26 in6.6 mm N/A 0.27 in6.9 mm N/A 0.35 in8.9 mm
Dissipation Factor N/A 0.005 Max. at 25°C, 1 kHZ
Insulation Resistance N/A 25 MΩ*µF at125°C, need not exceed 1GΩ 4000 MΩ*µF at25°C, need not exceed 100GΩ
Dielectric Withstanding Voltage N/A 12.5 kV rated 15 kV burn-in for 2 hours at 100°C 17.5 kV proof for 5 seconds
Standard/Non-Standard1 N/A Standard Part
Voltage Rating N/A 12.5 kVDC
  • 1 Non-standard parts will have longer lead times and potentially higher pricing. Please contact Teledyne Reynolds Engineering department to determine feasibility for use in your application.