The Hi/MateD™ Series of high voltage insertable/removable contact assemblies are rated at 13.5 kVDC and can be fitted into a Subminiature-D (Sub-D) 8 gauge insert cavity. The assemblies are ideal for airborne applications up to 70,000 feet altitude over a temperature range of -55 °C to 125 °C. Hi/MateDis fully compatible with signal lines, co-axial, fiber optic and power contacts in the same Sub-D connector. These contact assemblies are independent high voltage connectors, and do not rely upon the dielectric properties of the Sub-D insert.
Complete cable assemblies with Hi/MateD™ high voltage contact assemblies installed into Positronic CBD Series Subminiature-D connectors, are available from Teledyne Reynolds as fully tested units.
| Items |
 178-5727 Single-Ended Plug Contact Assembly |
 178-5729 Double-Ended Plug Contact Assembly |
 178-5728 Single-Ended Receptacle Contact Assembly |
 178-5741 Double-Ended Receptacle Contact Assembly |
 178-5729 Double-Ended Plug-Receptacle Contact Assembly |
|||||
| Description |
The Hi/MateD™ Series of high voltage insertable/removable contact assemblies are rated at 13.5 kVDC and can be fitted into a Subminiature-D (Sub-D) 8 gauge insert cavity. The assemblies are ideal for airborne applications up to 70,000 feet altitude over a temperature range of -55 °C to 125 °C. Hi/MateDis fully compatible with signal lines, co-axial, fiber optic and power contacts in the same Sub-D connector. These contact assemblies are independent high voltage connectors, and do not rely upon the dielectric properties of the Sub-D insert. Complete cable assemblies with Hi/MateD™ high voltage contact assemblies installed into Positronic CBD Series Subminiature-D connectors, are available from Teledyne Reynolds as fully tested units. |
|||||||||
| Series | Hi/MateD™ | |||||||||
| Number of Contacts | Various Pins | |||||||||
| Voltage Rating | 13.5 kVDC | |||||||||
| Altitude Rating | 70,000 ft | |||||||||
| Operating Temperature | -55 to 125 ºC | |||||||||
| Current Rating | 4 A | |||||||||
| Insulator Material | Plastic | |||||||||
| Coupling Style | D-Sub | |||||||||
| Coupling Nut Material | D-Sub | |||||||||
| Contact Material | BeCu | BeCu | Brass | Brass | Brass/BeCu | |||||
| Contact Finish | Gold | |||||||||
| Wire Type | Non-Shielded | |||||||||
| Wire Insulation | FEP | |||||||||
| Test Voltage at 70,000 ft | 18 kVDC | |||||||||
| Cable Assembly Length1 | All cable assembly cable lengths are to be specified in inches only. For example, to order part number 178-6027 with a cable length of 10 feet 8 inches the cable assembly part number would be specified as 178-6027-128N. | |||||||||
| Manufacturing Notes | Contact Teledyne Reynold's Engineering to discuss custom designs. Product numbers and specs subject to change without notice. Products listed represent only a small selection of Teledyne Reynold's products please visit www.teledynereynolds.com for the most up to date product information. | |||||||||
| Assembly Type | ||||||||||
| Assembly Type | ||||||||||
|
||||||||||
