Teledyne Reynolds, Incorporated
Teledyne Reynolds, Incorporated
1001 Knox Street.
Torrance, California
90502
TEL: (310) 823-5491 • FAX #1: (310) 822-8046
FAX #2: (310) 822-6815 • tri_techsupport@teledyne.com
Print Back
PeeWee is a series of subminiature, high voltage connectors and cable assemblies for use in high voltage applications where dense electronic packaging is required. Pee-Wee uses the Advanced interface sealing system. This unique method of sealing high voltage at reduced atmospheric pressure permits the Pee-Wee series to be rated at 12 kVDC at 70,000 feet and over a temperature range of -55 to +125° C. The series consists of a wide selection of interconnection components:
  • Single and multiple pin receptacles
  • Plastic and ceramic receptacles
  • Single and multiple pin plug cable assemblies
TWT (Traveling Wave Tube) Applications
Pee-Wee connectors and cable assemblies are well suited to interconnect TWTs to a power supply by providing reliable interconnections from the gun, collector and ion pump.

Modularization of Airborne High Voltage Power Supplies
By using Pee-Wee connectors, it is possible to package or re-package a high voltage power supply into a set of four or five modules which can be easily and reliably mated and un-mated with one another. This packaging technique permits the pre-testing of individual modules as they are being manufactured and to replace failed modules in the field when spare modules are available.

Unit of Measure

Specifications

Series

 N/A PeeWee

Assembly Type

 N/A Double-Ended Right Angle Receptacle Cable Assembly

Altitude/Reduced Pressure Rating

 N/A 70,000 ft.

Current Rating

 N/A 1.6 Amp

Operating Temperature

 N/A -55 to 125 ºC

Test Voltage

 N/A 18 kVDC

Coupling Style

 N/A Push-Pull

Mating Compatibility

 N/A Mates with all non-threaded Pee-Wee series plug cable assemblies.

Interface Seal

 N/A Silicone Rubber

Encapsulation

 N/A Back end of connector is encapsulated with silicone rubber

Insulator Material

 N/A Plastic
Standard/Non-Standard1 N/A Non-standard Part

Sealed Receptacle

 N/A Yes

Export Classification

 N/A TBD

RoHS Compliant

 N/A TBD

Voltage Rating

 N/A 12 kVDC

Wire Insulation

 N/A Etched FEP

Cable / Wire Properties

Wire Diameter

 N/A 0.050 in

Body Properties

Coupling Nut Material

 N/A Plastic

Contact Properties

Contact Type

 N/A Male

Contact Design

 N/A Spherical Radius, Molded in Place

Contact Material

 N/A BeCu, Gold Plated

Contact Size

 N/A 24 AWG

Contact Diameter

 N/A 0.030 in0.762 mm

Application

N/A

  • Lasers
  • Photomultipliers
  • Power Supplies
  • TWT
  • 1 Non-standard parts will have longer lead times and potentially higher pricing. Please contact Teledyne Reynolds Engineering department to determine feasibility for use in your application.