Teledyne Reynolds, Incorporated
Teledyne Reynolds, Incorporated
1001 Knox Street.
Torrance, California
90502
TEL: (310) 823-5491 • FAX #1: (310) 822-8046
FAX #2: (310) 822-6815 • tri_techsupport@teledyne.com
Print Back
  1. Capacitance Tolerance:-  ± 10%
  2. Dissipation Factor:- 0 .005 Max. at 25°C, 1 kHZ
  3. Insulation Resistance:-
       4000 MΩ*µF at25°C, need not exceed 100GΩ
       25 MΩ*µF at125°C, need not exceed 1GΩ
  4. Dielectric withstanding voltage:-
       20 kV rated
       24 kV burn-in for 2 hours @ 100°C
       28 kV proof for 5 seconds
  5. Mylar wrapped, epoxy endcapped
  6. Black dot indicates outer foil
  7. Wire leads are AWG 18 solder coated copper
  8. Safety:- Capacitors are shipped with leads shorted
We also manufacture military quality standard and custom designed Spark Gaps and Voltage Multipliers. If you have a corona test requirement but lack the necessary test equipment, we offer AC and DC corona testing services including a test report. Call for information concerning these services.
PI-Page-no-7
SI-Page-no-7
Unit of Measure
1 

Part Number

Capacitance

Length

Width

Thickness

Voltage Rating

M102A203A001 N/A 1 nF N/A 2.57 in65.3 mm N/A 1.58 in40.1 mm N/A 0.25 in6.4 mm N/A 20 kVDC
M252A203A000 N/A 2.5 nF N/A 2.82 in71.6 mm N/A 1.78 in45.2 mm N/A 0.25 in6.4 mm N/A 20 kVDC
M502A203A000 N/A 5 nF N/A 3.44 in87.4 mm N/A 2.24 in56.9 mm N/A 0.34 in8.6 mm N/A 20 kVDC
M103A203A000 N/A 10 nF N/A 4.19 in106 mm N/A 2.58 in65.5 mm N/A 0.42 in10.7 mm N/A 20 kVDC
M253A203A000 N/A 25 nF N/A 5.32 in135 mm N/A 3.77 in95.8 mm N/A 0.58 in14.7 mm N/A 20 kVDC
Unit of Measure
1