Teledyne Reynolds, Incorporated
Teledyne Reynolds, Incorporated
1001 Knox Street.
Torrance, California
90502
TEL: (310) 823-5491 • FAX #1: (310) 822-8046
FAX #2: (310) 822-6815 • tri_techsupport@teledyne.com
Print Back
  1. Capacitance Tolerance: ±10%
  2. Dissipation Factor: .005 Max. at 25°C, 1 kHZ
  3. Insulation Resistance:
      4000 MΩ*µF at25°C, need not exceed 100GΩ
      25 MΩ*µF at 125°C, need not exceed 1GΩ
  4. Dielectric withstanding voltage:
      5.0 kV rated
      7.5 kV burn-in for 2 hours at 100°C
      10.0 kV proof for 5 seconds
  5. Mylar wrapped, epoxy endcapped
  6. Black dot indicates outer foil
  7. Wire leads are AWG 18 solder coated copper
  8. Safety: Capacitors are shipped with leads shorted

We also manufacture military quality standard and custom designed Spark Gaps and Voltage Multipliers. If you have a corona test requirement but lack the necessary test equipment, we offer AC and DC corona testing services including a test report. Call for information concerning these services.

PI-Page-no-2
SI-Page-no-2
Unit of Measure
1 

Part Number

Capacitance

Length

Width

Thickness

Voltage Rating

M502A502A002 N/A 5 nF N/A 1.44 in36.6 mm N/A 0.82 in20.8 mm N/A 0.17 in4.3 mm N/A 5 kVDC
M103A502A000 N/A 10 nF N/A 1.69 in42.9 mm N/A 0.97 in24.6 mm N/A 0.20 in5.1 mm N/A 5 kVDC
M253A502A000 N/A 25 nF N/A 2.19 in55.6 mm N/A 1.32 in33.5 mm N/A 0.22 in5.6 mm N/A 5 kVDC
M503A502A003 N/A 50 nF N/A 2.56 in65.0 mm N/A 1.62 in41.1 mm N/A 0.26 in6.6 mm N/A 5 kVDC
M104A502A004 N/A 100 nF N/A 3.06 in77.7 mm N/A 2.01 in51.1 mm N/A 0.31 in7.9 mm N/A 5 kVDC
Unit of Measure
1