Teledyne Reynolds Inc. - Quiet Line High Voltage Wire and Cable

Contact us at: (310) 823-5491

"Quiet Line" Distributed Loss R.F. Attenuation Cable
Quiet Line is a continuously extruded, distributed loss, low pass filter line for high voltage applications. Quiet line is a flexible element offering R.F. power attenuation and can be spliced onto an existing high voltage lead assembly or supplied as an entire high voltage lead assembly.

Quiet Line is available with or without a silicone rubber coating. This continuous thin wall coating is applied over the FEP or PFA jacket and allows the user to achieve a superior dielectric bond when potting or encapsulating with a compatible silicone material.

Quiet Line is available either shielded or non-shielded with or without the silicone rubber coating. Six loss core diameters are offered providing a range of rated voltages and R.F. insertion loss characteristics. The configurations are shown with the attributes of each configuration.

Special configurations are available pending a review of your requirements by Reynolds engineering department personnel.

Operating Temperature
-55 to +125 ºC

Request Information Search by Specification

Unit of Measure

Items	178-8051 Quiet Line Type 1 Request Quote	178-8301 Quiet Line Type 1 Request Quote	178-8053 Quiet Line Type 1 Request Quote	178-8050 Quiet Line Type 1 Request Quote	178-8382 Quiet Line Type 1 Request Quote
Attenuation (480 MHZ)	N/A 11 dB/ft	N/A 15 dB/ft	N/A 21 dB/ft	N/A 21 dB/ft	N/A 15 dB/ft
Attenuation (2.4 GHZ)	N/A 90 dB/ft	N/A 60 dB/ft	N/A 140 dB/ft	N/A 130 dB/ft	N/A 90 dB/ft
Conductor Gauge	N/A 22 AWG	N/A 24 AWG	N/A 22 AWG	N/A 22 AWG	N/A 22 AWG
Conductor Strands	N/A 19/34	N/A 19/36	N/A 19/34	N/A 19/34	N/A 19/34
Diameter	N/A 0.085 in2.1 mm	N/A 0.073 in1.8 mm	N/A 0.150 in3.8 mm	N/A 0.130 in3.3 mm	N/A 0.110 in2.7 mm
Overall Diameter	N/A 0.085 in	N/A 0.073 in	N/A 0.150 in	N/A 0.130 in	N/A 0.110 in
Insulator Material	N/A PFA
Braid Material	N/A Silver Plated Copper
Jacket Material	N/A FEP PFA
Voltage Stress Testing	N/A 100% test at 140% of rated voltage (room ambient)
Insertion Loss Testing	N/A 100% insertion loss verification performed on each extrusion lot. The swept frequency insertion loss technique is used within the specified frequency range per MIL-C-17F. Test specimens are shielded with a BNC termination.
Operating Temperature	N/A -55 to 125 ºC
Jacketed	N/A No
Silicone Coated	N/A No
Etched	N/A No
Default Color¹	N/A Natural
Conductor Plating	N/A Silver Plated
Conductor Material	N/A Copper
Construction Style	N/A 1
Standard/Non-Standard²	N/A Standard Part
Silicone Coated Part Number	N/A 178-8024	N/A 178-8302	N/A	N/A 178-8025	N/A 178-8381
Nomex ® Jacketed	N/A No
Twisted Pair	N/A No
Twisted Shielded Pair	N/A No
Voltage Rating	N/A 12 kVDC	N/A 15 kVDC	N/A 20 kVDC	N/A 20 kVDC	N/A 20 kVDC
¹ Additional colors available upon request ² Non-standard parts will have longer lead times and potentially higher pricing. Please contact Teledyne Reynolds Engineering department to determine feasibility for use in your application.