Contact us at: (310) 823-5491
The 500, 531, 531 SL, 521 and 521 SL series of high voltage connectors, kits and cable assemblies are designed to minimize the risk of electrical shock to personnel through the use of recessed contacts. Both the receptacle and plug connectors have recessed contacts positioned to stand-off the rated voltage in the unmated condition at sea level of each respective series.

In addition to the recessed contact, the connectors also feature a spring finger body contact which assures a reliable ground circuit prior to engagement of the center contact; further reducing the risk of electrical shock.

Operating Temperature Range
-40 to 85°C

Series 531
Specific Characteristics:
Voltage Rating : 15 kVDC at 70,000 ft.
Unmated Voltage Rating : 10 kVDC at sea level
Test Voltage : 31 kVDC at 70,000 ft.
Unit of Measure

Specifications

Series

N/A 531

Assembly Type

N/A Single-Ended Receptacle Cable Assembly

Altitude/Reduced Pressure Rating

N/A 70,000 ft.

Current Rating

N/A TBD 10 A

Operating Temperature

N/A -40 to 85 ºC

Current Rating

N/A 10 A

Pressure Differential Rating

N/A Sealed for 1 ATM

Maximum Leak Rate (Helium)

N/A 1 X 10 -6 cc/sec
Panel Mounting Style1 N/A Rear Mount

Finish

N/A Silver Plate

Contact

N/A Brass

Accomodates

N/A Type 'C' Cable (P/N 167-2669)

Production Test

N/A 100% tested at 15KVDC for 10 sec. 2% lot tested at altitude to 21KVDC, 3 minutes min.

Coupling Style

N/A Bayonet

Braid Termination

N/A Crimp
Standard/Non-Standard2 N/A Standard Part

Wire Type

N/A Shielded

Sealed Receptacle

N/A No

Plug Contact Material/Finish

N/A BeCu/Au

Receptacle Contact Material/Finish

N/A Brass/Au

Receptacle Insulator Material

N/A Plastic

Plug Insulator Material

N/A Plastic

Wire Insulation

N/A PE

Export Classification

N/A TBD

RoHS Compliant

N/A TBD

Voltage Rating

N/A 15 kVDC

Body Properties

Coupling Nut Material

N/A Brass

Coupling Nut Properties

Bayonet Coupling Nut Material

N/A Brass

Bayonet Coupling Nut Finish

N/A Nickel

Contact Properties

Contact Type

N/A Male

Dimensions

B

N/A 2.875 in73.02 mm

C

N/A 1.270 in32.26 mm

D

N/A 0.312 in7.92 mm

Hex

N/A 0.75 in19.05 mm
  • 1 Allow mounting hole clearence for 5/8-24 UNEF thread
  • 2 Non-standard parts will have longer lead times and potentially higher pricing. Please contact Teledyne Reynolds Engineering department to determine feasibility for use in your application.