Single Ended, Shielded Cable assembly
Maxxum series connectors are robust in their construction, using stainless steel for the threaded coupling nut and body. This series is ideally suited for use as a high power, TWT collector interconnect or in E-beam inspection equipment where a low partial discharge design and hermetic feedthrough are required.
The cable assemblies use FEP cable with a double braid crimped directly to the stainless steel body of the connector
Series |
N/A Maxxum |
Assembly Type |
N/A Single-Ended Plug Cable Assembly |
Altitude/Reduced Pressure Rating |
N/A 70,000 ft. |
Current Rating (RMS) |
N/A 5 A |
Operating Temperature |
N/A -55 to 125 ºC |
Test Voltage |
N/A 130% of rated voltage at 70,000 ft. simulated altitude |
Mating Compatibility |
N/A Mates all Maxxum series threaded receptacles. |
Interface Seal |
N/A Silicone Rubber |
Panel Mounting Style |
N/A Flange Mount |
Insulator Material |
N/A Plastic |
| Standard/Non-Standard1 | N/A Standard Part |
Coupling Style |
N/A Threaded |
Sealed Receptacle |
N/A N/A |
Wire Insulation |
N/A 0.150 in. diameter FEP with double shield. FEP |
Braid Termination |
N/A Solder |
Export Classification |
N/A TBD |
RoHS Compliant |
N/A TBD |
Voltage Rating |
N/A 25 kVDC |
Wire Type |
N/A Shielded |
