Contact us at: (310) 823-5491
Maxxum is a series of single pin, shielded connectors and cable assemblies rated at 25 KVDC. These connectors are robust in their construction, using stainless steel for the threaded coupling nut and body. This series is ideally suited for use as a high power TWT collector interconnect.

Maxxum series connectors are used in applications where a tightly shielded assembly is required. The cable assemblies use FEP cable with a double braid crimped directly to the stainless steel body of the connector.

Both plastic and high alumina ceramic receptacles are available depending on the users hermeticity requirements. EM1 and safety shielding from the cable assembly to the receptacle mounting surface is a feature of both the plastic and ceramic receptacles.

Maxxum connectors and cable assemblies will operate at their rated voltage at 70,000 feet altitude and over a temperature excursion of -55 to +125 °C.

1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 

Part Number

Assembly Type

Operating Temperature

Panel Mounting Style

Contact Type

Insulator Material

Voltage Rating

Wire Type

Assembly Type

Part #

Add To Cart/Request Quote
N/A Single-Ended Plug Cable Assembly N/A -55 to 125 ºC N/A Flange Mount N/A Female N/A Plastic N/A 25 kVDC N/A Shielded N/A N/A Request Quote
N/A Double-Ended Plug Cable Assembly N/A -55 to 125 ºC N/A N/A Female N/A Plastic N/A 25 kVDC N/A Shielded N/A N/A Request Quote
N/A Receptacle Bag Assembly N/A -55 to 125 ºC N/A N/A Male N/A Plastic or Ceramic N/A 25 kVDC N/A Shielded N/A N/A Request Quote
N/A Receptacle Bag Assembly N/A -55 to 125 ºC N/A Solder Flange N/A Male N/A Ceramic N/A 25 kVDC N/A N/A N/A Request Quote
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1