Contact us at: (310) 823-5491

Ceramic Panel Mount Receptacle

Maxxum series connectors are robust in their construction, using stainless steel for the threaded coupling nut and body. This series is ideally suited for use as a high power, TWT collector interconnect or in E-beam inspection equipment where a low partial discharge design and hermetic feedthrough are required.

The cable assemblies use FEP cable with a double braid crimped directly to the stainless steel body of the connector

Unit of Measure



N/A Maxxum

Assembly Type

N/A Receptacle Bag Assembly

Altitude/Reduced Pressure Rating

N/A 70,000 ft.

Current Rating (RMS)

N/A 5 A

Operating Temperature

N/A -55 to 125 ºC

Test Voltage

N/A 130% of rated voltage at 70,000 ft. simulated altitude

Mating Compatibility

N/A Mates all Maxxum series plug cable assemblies.

Interface Seal

N/A Silicone Rubber

Panel Mounting Style

N/A Solder Flange

Insulator Material

N/A Ceramic
Standard/Non-Standard1 N/A Standard Part

Coupling Style

N/A Threaded

Sealed Receptacle

N/A Yes

Maximum Leak Rate (Helium)

N/A 1x10-8 cc/sec

Mounting Notes

N/A Solder Flange

Export Classification


RoHS Compliant


Voltage Rating

N/A 25 kVDC

Contact Properties

Contact Type

N/A Male

Contact Size

N/A 16

Contact Diameter

N/A 0.062
  • 1 Non-standard parts will have longer lead times and potentially higher pricing. Please contact Teledyne Reynolds Engineering department to determine feasibility for use in your application.