Teledyne Reynolds, Incorporated
Teledyne Reynolds, Incorporated
1001 Knox Street.
Torrance, California
90502
TEL: (310) 823-5491 • FAX #1: (310) 822-8046
FAX #2: (310) 822-6815 • tri_techsupport@teledyne.com
Print Back

Double Ended, Shielded Cable Assembly

Maxxum series connectors are robust in their construction, using stainless steel for the threaded coupling nut and body. This series is ideally suited for use as a high power, TWT collector interconnect or in E-beam inspection equipment where a low partial discharge design and hermetic feedthrough are required.

The cable assemblies use FEP cable with a double braid crimped directly to the stainless steel body of the connector

Unit of Measure

Specifications

Series

 N/A Maxxum

Assembly Type

N/A Double-Ended Plug Cable Assembly

Altitude/Reduced Pressure Rating

 N/A 70,000 ft.

Current Rating (RMS)

 N/A 5 A

Operating Temperature

 N/A -55 to 125 ºC

Test Voltage

 N/A 130% of rated voltage at 70,000 ft. simulated altitude

Mating Compatibility

 N/A Mates all Maxxum series threaded receptacles.

Interface Seal

 N/A Silicone Rubber

Insulator Material

 N/A Plastic
Standard/Non-Standard1 N/A Standard Part

Coupling Style

 N/A Threaded

Sealed Receptacle

 N/A N/A

Wire Insulation

 N/A 0.150 in. diameter FEP with double shield. FEP

Braid Termination

 N/A Solder

Export Classification

 N/A TBD

RoHS Compliant

 N/A TBD

Voltage Rating

 N/A 25 kVDC

Wire Type

 N/A Shielded

Body Properties

Coupling Nut Material

 N/A CRES Stainless Steel

Contact Properties

Contact Material

 N/A BeCu/Au with CRES Hood

Contact Type

 N/A Female

Contact Size

 N/A 16
  • 1 Non-standard parts will have longer lead times and potentially higher pricing. Please contact Teledyne Reynolds Engineering department to determine feasibility for use in your application.