Teledyne Reynolds, Incorporated
Teledyne Reynolds, Incorporated
1001 Knox Street.
Torrance, California
90502
TEL: (310) 823-5491 • FAX #1: (310) 822-8046
FAX #2: (310) 822-6815 • tri_techsupport@teledyne.com
Print Back
The 600 Series is a complete line of subminiature, coaxial, high voltage connectors. In production since 1964, these connectors have proven to be extremely reliable in a variety of both, Aerospace/Defense and high-end commercial applications. The 600 Series is also, possibly, the smallest coaxial, high voltage connector rated for use at 70,000 ft. available on the market.

Various adapters are available on special order.
Unit of Measure

Specifications

Series

 N/A 600

Voltage Rating

 N/A 5 kVDC

Altitude/Reduced Pressure Rating

 N/A 70,000 ft.

Assembly Type

N/A Receptacle Bag Assembly

Current Rating

 N/A 1 Amp

Operating Temperature

 N/A -55 to 125 ºC

Test Voltage

 N/A 7.5 kVDC at 70,000 ft. (simulated) at ambient temperature
Mating Compatibility1 N/A Mates all Series 600 plug assemblies

Insulator Material

 N/A Plastic

Lock Wire Holes in Coupling Nut

 N/A No

Panel Mounting Style

 N/A Rear Mount

Mounting

 N/A Requires clearance for .250-56 UNS thread or optional “D” hole

Panel Mounting Torque

 N/A 8 to 10 in-lbs

Maximum Leak Rate (Helium)

 N/A 1 X 10-6 cc/sec

Pressure Differential Rating

 N/A Sealed for 1 ATM

Sealed Receptacle

 N/A Yes
Standard/Non-Standard2 N/A Standard Part

Coupling Style

 N/A Threaded

Export Classification

 N/A TBD

RoHS Compliant

 N/A TBD

Body Properties

Coupling Nut Material

 N/A Brass

Contact Properties

Contact Material

 N/A BeCu

Contact Finish

 N/A Gold

Contact Diameter

 N/A 0.031 in0.79 mm
  • 1 It is highly recommended that gold plated, brass body receptacles only be mated with gold plated, brass body, knurled plugs. Stainless steel parts should not be mated with gold plated, brass body parts.
  • 2 Non-standard parts will have longer lead times and potentially higher pricing. Please contact Teledyne Reynolds Engineering department to determine feasibility for use in your application.